This article mainly introduces:

Turkey hydraulic cylinder,push bench hydraulic cylinder manufacturer,push bench hydraulic cylinder

(Turkey push bench hydraulic cylinder,produced by Hebei Hengyu company）

push bench hydraulic cylinder are widely used in Turkey，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed push bench hydraulic cylinder for customers from Turkey.

Introduction to push bench hydraulic cylinder:

The push bench hydraulic cylinder is mainly composed of body, piston, piston rod, push bench hydraulic cylinder head, push bench hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the push bench hydraulic cylinder into two chambers, and moves reciprocally in the push bench hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the push bench hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the push bench hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the push bench hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the push bench hydraulic cylinder bottom and the push bench hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the push bench hydraulic cylinder The working medium of the push bench hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; push bench hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the push bench hydraulic cylinder: The buffer structure of the push bench hydraulic cylinder is to prevent the piston from colliding with the push bench hydraulic cylinder head at the end of the stroke.

The push bench hydraulic cylinder should be vented: when the push bench hydraulic cylinder is installed or parked for a long time to work again, the air will penetrate into the push bench hydraulic cylinder and the pipeline system. In order to prevent the abnormal phenomenon of crawling, noise and heating of the actuator, the air in the push bench hydraulic cylinder and the system should be discharged. In order to facilitate the removal of air deposited in the push bench hydraulic cylinder, the oil is best entered and discharged from the highest point of the push bench hydraulic cylinder. push bench hydraulic cylinders that require higher motion stability are often equipped with exhaust plugs at both ends. Before working, unscrew the exhaust plug to make the piston go back and forth several times without load in the whole stroke, and the air can be discharged through the exhaust plug. After the air is drained, tighten the exhaust plug before working.

Improve the service life of the push bench hydraulic cylinder: it is necessary to maintain the normal clearance of the combined surface of the hydraulic components. When manufacturing or repairing the main parts of the push bench hydraulic cylinder (such as the push bench hydraulic cylinder block, piston rod, etc.), the assembly should be carried out in accordance with the tolerance lower limit of the assembly size, which can well reduce the occurrence of cavitation. If cavitation has occurred in the hydraulic components, only metallographic sandpaper polishing technology can be used to remove cavitation pitting and surface carbon deposits, and general fine sandpaper must not be used for polishing After the push bench hydraulic cylinder is repaired, the hydraulic system should run smoothly for a certain period of time so that the hydraulic oil in the hydraulic system can be fully circulated; If necessary, the push bench hydraulic cylinder inlet pipe (or return pipe) can be disassembled. Make the hydraulic oil overflow to achieve the effect of single push bench hydraulic cylinder exhaust.

The advantages and disadvantages of the push bench hydraulic cylinder: the surface of the push bench hydraulic cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the push bench hydraulic cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about push bench hydraulic cylinder:

Need to buy a hydraulic cylinder, now only know that the pressure needs to be between 20t and 50t. Two-way travel, how to determine the type of cylinder?
Important parameters of the cylinder: cylinder diameter, stroke, use pressure. First, the system pressure must be determined according to the precision of the operation of the application equipment, and the cylinder diameter can be determined by the force and system pressure. Then, according to how the equipment and the cylinder are installed and connected, determine the installation method of the cylinder and then determine the specific installation size, the size of the oil port, whether the buffer is needed and other details.

How to set up the one-way cylinder hydraulic system?
Single acting oil cylinder, that is, an oil cylinder with an oil port, can use two three-way valves to control the cylinder action. The three oil ports are respectively connected to P (oil pump), A (oil cylinder), and T (oil tank). If the oil pump is to run continuously, an electromagnetic relief valve can be added. When the cylinder is not moving, the relief valve can unload the oil pump. You can also add a three-way four-way valve, the middle function is unloaded, two outlets: A connected to the fuel tank, B connected to the cylinder.